Study on the castability of Co-Cr alloy for cast plates. Part 3: Effects of alloy fusion temperature and the heating temperature of the cast ring.

Y. Satoh, T. Ohyama, E. Nagai, M. Matsuzu, H. Toyoma, M. Ohwa, E. Kobayashi, H. Sakurai, K. Ohki, M. Nishiyama

研究成果: ジャーナルへの寄稿記事査読

1 被引用数 (Scopus)

抄録

Co-Cr alloy is used more frequently than Ni-Cr alloy as a non-precious alloy for cast plates in Japan. However, since the melting temperature of Co-Cr alloy is very high, about 1300 degrees C, and since it oxidizes easily, a vacuum-pressure casting machine capable of melting this alloy in a reduced atmosphere has recently been developed. Using this machine, the effects of fusion temperature and the heating temperature of the cast ring on the Co-Cr alloy were studied. It was found that in the vacuum-pressure casting method, both the fusion temperature of the Co-Cr alloy and the heating temperature of the cast ring had a significant effect (p < 0.01) on the castability of the Co-Cr alloy.

本文言語英語
ページ(範囲)49-56
ページ数8
ジャーナルThe Journal of Nihon University School of Dentistry
35
1
DOI
出版ステータス出版済み - 3月 1993

フィンガープリント

「Study on the castability of Co-Cr alloy for cast plates. Part 3: Effects of alloy fusion temperature and the heating temperature of the cast ring.」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル