Influence of pre-etched area and functional monomers on the enamel bond strength of orthodontic adhesive pastes

Yuriko Tezuka, Yasuhiro Namura, Akihisa Utsu, Kiyotaka Wake, Yasuki Uchida, Mizuki Inaba, Toshiki Takamizawa, Mitsuru Motoyoshi

研究成果: ジャーナルへの寄稿記事査読

抄録

This study was performed to investigate the influence of pre-etching area and functional monomers in orthodontic adhesive pastes on enamel bond strength. Bovine enamel was partially pre-etched with phosphoric acid for 30 s over areas with a diameter of 1.0, 2.0 or 3.0 mm, and metal brackets were then bonded with or without functional monomers in the orthodontic adhesive paste. For the baseline groups, the whole adherent area was pre-etched. The shear bond strength (SBS) and adhesive remnant index (ARI) were determined. The adhesive paste/enamel interfaces were observed by scanning electron microscopy (SEM). Although the adhesive paste with functional monomers showed higher SBS than the functional monomer-free adhesive paste in all groups, there were no significant differences in SBS between them regardless of the pre-etched area. The SBS increased with increasing pre-etched area in both orthodontic adhesive pastes. In SEM images of adhesive paste/enamel interfaces, although adhesive with functional monomers showed excellent adaptation, the functional monomer-free adhesive paste showed gap formation at the interface. These findings suggested that the pre-etching area greatly influenced bond strength, regardless of the presence or absence of the functional monomer in the orthodontic adhesive paste.

本文言語英語
論文番号8251
ジャーナルApplied Sciences (Switzerland)
11
17
DOI
出版ステータス出版済み - 9月 2021

フィンガープリント

「Influence of pre-etched area and functional monomers on the enamel bond strength of orthodontic adhesive pastes」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル